At the point where I am going to install the cross bracing to the trailing edge. My question is the 1 /4" brace goes into the trailing edge and I assume is attached to both the spar and the gussett. After installing the diamond gusset on the other side there is a approximate 1/8" gap between the cross bracing and the gussett. Should there be some form of a filler block to take up the space ? I was thinking making up a small triangular block that would be sandwiched between the gusset and the cross brace. Or do I pull up and attach to the gusset and not worry about the gap on the other side gusset plate ?
Thank you. |