Wire locking of certain critical hardware components in the Max has been referred to at various parts of the build manual. Also seen that some builders wire-lock additional parts not recommended specifically in the manual. Nothing wrong with that, and knowing these non-standard mods on wire-lock, may in fact provide other builders with additional options, if they so desire. It would be nice to make a check list of parts to be wire locked to help future builders, and also to aid those already flying, at time of periodic inspections. A few parts that come to mind: Turn buckles on rudder Turn buckles on tail wheel cable Elevator cable ( sleeve lock at both ends) Elevator and aileron cables - wire lock at anchor points to air-frame ( Total 6 points- one on each end of all 3 cables ) Wirelock / lock with cotter pin, clevis bolts (2) on rudder horn. Wirelock / lock with cotter pin, clevis bolts (5) on rudder and elevator hinges - [only for light tail.]
Suggestions welcome to add to this list. ( In case such a list already exists, would appreciate a link to it. ) Thanks |